Fire Alarm Installation Ideas
Fire alarm installation is a simple thing to do. If the consumer is building a new home, the architect may list where they are supposed to go. The builder can install them for the new homeowner. If however, the house that one buys is an existing home, and there are no fire or smoke alarms, the house as well as the occupants need some to be safe. Fire alarms and smoke alarms work in very certain ways. A smoke alarm detects smoke in very small quantities, and a fire alarm detects heat, and sometimes smokes. If there are no detectors then go purchase some. If as a customer one gets confused, ask for help from someone in the store. Most stores usually have a pamphlet that shows basic house plans and the most effective place to put them. If after all that one is still confused, call the local fire station. They will be happy to come to your home and give you some pointers as to where they would be most effective for your specific situation. Once that is complete comes the actual fire alarm installation. Most alarms come with simple instructions of how to hang them up on the ceilings or walls.
Needed Items For Fire Alarm Installation
The tools needed for installation are simple. Every homeowner has them somewhere around the house. One will need a small drill, a screwdriver, and a flashlight. The small drill is for drilling holes for mounting the hardware that will hold the alarm. Usually there are just two holes that need to be drilled. The next step in fire alarm installation is mounting the hardware that came in the box. This is usually in the form of some type of alarm holder that the actual alarm will mount to. The next step in fire alarm installation is to mount the alarm onto its holder that has just been mounted to the wall or ceiling. One may need the flashlight at this time in order to see effectively to mount the alarm. The alarm should not move around. If it does, the alarm is probably not mounted onto its holder properly. Make sure that after it is in place that it is snug and unmovable. No one wants their alarm on the ground where it will do no good. Finally, test the detector in place with whatever the manufacturer recommends.